Preset EQ

Preset EQ

The unit provides 4 preset EQ settings for your selection.

In either iPad/iPhone or AUX (auxiliary) mode :

-To select the preset EQ, press the EQ button from the remote control.

-Each press of the EQ button will scroll through following selection.

FLAT JAZZ CLASSIC ROCK POP

Care and Maintenance

-Do not subject the unit to excessive force, shock, dust or extreme temperature.

-Do not tamper the internal components of the unit.

-Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be used.

-Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.

-Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors.

Resetting the Unit

If the unit experiences a power surge or electric shock, it is possible that the internal micro-controller may lock up and the unit will not respond to any commands from the panel controls.

1.In this event, unplug and then reconnect the AC power plug into the wall outlet.

2.Use a straightened paper clip, toothpick or similar objects to press the RESET button located at the

rear of the Support Frame (see the below figure). The reset operation clears the system memory and all of your previous settings will be erased.

CAUTION: DO NOT USE SHARP, POINTED OBJECT TO PRESS THE RESET

BUTTON. IT MAY DAMAGE THE RESET SWITCH INSIDE THE UNIT.

RESET button

7

Page 7
Image 7
Haier IPD-01 manual Preset EQ