Video Input, Component Input ports | Haier L19R1BW instruction

COMPONENT (If connected to SVIDEO,select the SV external input source.)

3.Refer to the DVD player's manual for operating instructions.

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

Y Pb Pr

-To avoid picture noise (interference), leave an adequate distance between the VCR and TV

1.Read the user guide supplied with your AV devices and ensure that it has S-Video connectors;

2.Make sure that the power of the LCD-TV and the AV device are off;

Connection Option 1

Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

Connection Option 2
1.	Connect the audio and Svideo cables
	from the VCR's output jacks to the TV
	input jacks, as shown in the figure.
2.	Insert a video tape into the VCR and
	press PLAY on the VCR. (Refer to the	2

VCR owner s manual.)

3.Turn on the power of the LCD-TV first ; and then turn on the power of the AV device;

4.Press the TV/AV button to set the video input mode of the LCD-TV to S-VIDEO mode .

VCR