Haier L37A9-AKF owner manual DVD Setup, Hdmi or DVI Setup, How to connect, How to use

External Equipment Connections

DVD Setup

How to connect

1. Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr) input jacks on the TV and connect the DVD audio outputs to the AUDIO jacks on the TV, as shown in the figure.

2. If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the TV and Connect the DVD audio outputs to the AV IN jacks on the TV, as shown in the figure.

					AV OUT
Y	PbPr	CbCr	L AUDIO R	VIDEO	L AUDIO R
					S-VIDEO IN
		IN		AV1 IN

NOTE: If your DVD player does not have component video output, use S-Video.

How to use

1. Turn on the DVD player, insert a DVD.

2. Use the S-Video button on the remote control to select S-VIDEO or YPbPr/YCbCr mode.

3. Press Play button on external equipment for program play.

4. Refer to the DVD player's manual for operating instructions.

or

DVD

HDMI or DVI Setup

-To watch digitally broadcast programs, purchase and connect a digital set-top box.

How to connect

Use the TV`s COMPONENT (Y, Pb/Cb, Pr/Cr) INPUT jacks, VGA or HDMI port for video connections, depending on your set-top box connections available.

Then, make the corresponding audio connections.

							AV OUT
IN1	IN2
		Y	PbCb	CbCr	L AUDIO R	VIDEO	L AUDIO R
HDMI/DVI VIDEO		VGA IN
						AV IN

How to use

1. Turn on the digital set-top box. (Refer to the owner`s manual for the digital set-top box.)

2. Use TV/AV on the remote control to select VGA or HDMI (Y, Pb/Cb, Pr/Cr) mode.

3. Press Play button on external equipment for program play.

10