21
PC ADJUST
This function is used to adjust the position of image displayed on screen.
It can be selected when the LCD TV could be received PC signal
and in PC mode.
Press POINT ◄► buttons or ENTER button
to enter PC ADJUST menu.
It can be select "AUTO ADJUST",
"H-POSITION", "V-POSITION", "PHASE", "CLOCK" or "AUTO
SHUT DOWN" to adjust.
AUTO ADJUST: Press POINT ◄► buttons, and the TV
automatically detects incoming signal, and adjust itself to optimize
its performance. If the image is not displayed properly, a manual
adjustment is required (Refer to following adjustments).
PHASE: Eliminate disorder from the image. Press POINT ◄►
buttons to adjust PHASE. (0~100)
AUTO SHUT DOWN: Press POINT ◄► buttons to set AUTO SHUT DOWN ON or OFF. When PC is
switched Off, ''NO SIGNAL'' appears for 30 seconds, TV will be automatically switched to Backlight off
mode. During Backlight Off Mode within 10 minutes, TV will be switched to On Mode if PC is switched
On. After Backlight Mode continues for 10 minutes, it will be switched to Standby Mode. During Standby
mode, TV will not be switched to On mode even if PC is switched On. During Backlight Off mode, POWER
indicator will become green.POWER ON/OFF button, NUMERIC (0-9) buttons and CHANNEL up/down
buttons are enabled to switch On TV.
MENU OPERATION (PC mode)SETUP
■ Press BACK button to return to the previous menu.
■ Press MENU button or wait for 5~60 seconds to exit menu
operation.
SETUP MENU
1
2
Press MENU button and the main menu will appear.
Press POINT ◄► buttons to select "SETUP", and will display
SETUP menu.
Press POINT ▲▼ buttons or ENTER button to enter into
SETUP menu.
Press POINT ▲▼ buttons to select the item desired.
3
Press POINT ◄► buttons to enter the item selected.
4
SETUP
CHILD LOCK ON
ECO OFF
DYNAMIC AI ON
ACTIVE CONTRAST ON
PC ADJUST
SHOP MODE
SELECT ADJUST BACK EXIT
:: ::
SETUP
CHILD LOCK ON
ECO OFF
DYNAMIC AI ON
ACTIVE CONTRAST ON
PC ADJUST
SHOP MODE
SELECT ADJUST BACK EXIT
:: ::
Note:
● "PC ADJUST" is only active in PC mode.
SETUP
AUTO ADJUST
AUTO SHUT DOWN ON
PC ADJUST
V - POSITION
CLOCK
PHASE
H - POSITION
SELECT ADJUST BACK EXIT
:: ::
H-POSITION: The horizontal picture position will be moved to the
left side by pressing POINT ◄ button. And it will be moved to the
right side by pressing POINT ► button. (0~100)
V-POSITION: The vertical picture position will be moved down
side by pressing POINT ◄ button. And it will be moved up side by
pressing POINT ► button. (0~100)
CLOCK: Eliminate flicker from the image. Press POINT ◄►
buttons to adjust CLOCK. (0~100)
AUTO ADJUST