Haier LET26C430 Introduction, Main parameter, P.05, Main features, Installation, 55 W, 75 W, CI x

02Introduction

CAUTION INSTALLATION

Never tamper with any components inside the TV, or any other adjustment controls not mentioned in this manual. All LED-TVs are high voltage instruments. When you clean up dust or water drops on the LED PANEL or CABINET, the power cord should be pulled out from the receptacle, then wipe the TV with a dry soft cloth. During thunder and lighting, unplug the power cord and antenna cord to prevent damage to your TV. All repairs to this TV should only be performed by qualified TV service personnel.

Main features

①Used as Television, display terminal, PC display；

②High luminance, wide viewing Angle；

*Locate the TV in the room where light does not strike the screen directly. *Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.

*Allow enough space between the TV and the wall to permit ventilation.

*Avoid excessively warm locations to prevent possible damage to the cabinet or premature component failure.

*Do not cover the ventilation openings when using theTV.

3HDMI interface and SCART Interface；

4NICAM；

5Time shift

Main parameter

Panel		26"	32"
TV System		PAL-B/G、I、D/K
		SECAM- B/G、D/K、L、L'
Video Signal System		PAL/NTSC/SECAM
Input Power Voltage		100-240V~ 50/60Hz
Power consumption		55 W		75 W
Audio Output Power （THD	7%）	2x5W		2x8W
Signal Input		Analog RGB(PC)x1
		PC Audiox1
		High-Definition Multimedia Interface (HDMI)x2
		Video Input x1
		CVBS Input x1
		YPb Prx1
		Mini Scart x 1
		USB x 1
		CI x 1
		Tuner x 1
Horizontal definition（TV line）		Composite Video input	>=350
		YPbPr	>=400

P.05