Using process
Using process
Introduction of the major function The machine has good comprehensive performance, and nice appearance.
In the respect of increasing the clean rate, it creates the air suction washing method.
The spinning of the pulsator automatically produces large quantity of bubbles, which can
strengthen the activity of the detergent remarkablly. And the rising and exploding of the
bubbles produce the effects of absorption and bombardment on the dirt particles in the
fibre of clothes that is difficult to remove by common washing methods.
It adopts complete enclosed base frame and low-noise motor, and thus reduces the
working noise significantly. We can guarantee that the purchase of this machine will bring
you a clean world without disturbing your quiet life.
Pulsator
Foam-removing spinning during high-efficiency rinsing
Bubble washing
Use the foam-removing spinning to
remove the extra detergent liquid. It can
both shorten the washing time and save
the water consumption.
When the pulsator rotates, the machine will
inhale air and produce small bubble. The bubble
can explode and produce tiny water current to
help dissolving the detergent, and improve the
cleaning capability the detergent , therefore
raise the cleaning ratio.
Foam-removing
spinning
Remove most of the foam
extra detergent liquid. it can
both shorten the washing
time and save the water
consumption.
Remove the detergent
liquid remained
The effect is best when the
laundries quantity is below
80% of the rated value.
Spin
Spin for about
1~2 minutes Fill water for
about 1 minutes Spin for about
1~2 minutes
Quick water-filling entrance
If you do not need spraying spin, you can
fill water into the wash tub directly through
this entrance. It can reduce the humidity
inside the control panel significantly and
prolong the operating life of the components.
Quick water-filling entrance