Haier XPB60-113S user manual Washing sequence

Washing sequence

Wash timer

(To set to below 2 minute, first set to 5 minute then turn it back. it can increase the service life of the timer).

		Water-filling selector handle
		Overfilling sign
Wash selector	Water-filling entrance	Buzzer		Spin timer
(Strong current,			(to set to below 1 minute,
		(The buzzer will ring when
standard current)		the washing finishes)	first set to 2 minute then
			turn it back. it can increase

the service life of the timer).

	OFF
OFF	STRONG
	OFF
	STANDARD
	MAX
	DRAIN
	BUZZER
WASH TIMER	WASH SELECTOR
	SPIN TIMER

Wash

1.Water-filling selector		WASH	SPIN
(1)	Set the water-filling selector at the "WASH" side.			Figure 1
(Figure 1)
(2)	Set the water level adjusting lever to needed line.

2. Fill the water and add the dissolved washing

powder to make the water level reach the preset
position. (Figure 2)	Figure 2
Run washing program for some time to stir and
dissolve the powder completely.	STRONG
	STANDARD
3.Put in the laundries. If the water quantity is	DRAIN
insufficient, please add water.	WASH SELECTOR
	Figure 3
4.Select the current.	OFF
Select the strength of the current according to
the laundries. (Figure 3)
5.Select the washing time
Select the washing time according to the	WASH TIMER Figure 4
laundries. (Figure 4)

6.After washing, the buzzer will ring. Set the "WASH SELECTOR" at "DRAIN". (Figure 5).

STRONG

STANDARD

DRAIN

WASH SELECTOR

Figure 5

9