Haier XPB60-113S Install the water inlet hose Select the water level, quantity of the laundries

Install the water inlet hose; Select the water level

Insert the water inlet hose into the water-filling entrance on the control pane directly.(pull it out to dismantle it)

	Water inlet hose
Select water level according to the		Water inlet
quantity of the laundries.	Water level
Set the water level adjusting lever
	indicator
to needed line.

Use the new water inlet hose provided with the machine to connect to the water faucet. Old hose sets should not be reused.

Maximum Max.

Med

Medium

Minimum Min

Quick water-filling entrance

You can fill	water into the	wash tub directly
through this	entrance. It	can reduce the	Quick water-filling entrance

humidity inside the control panel significantly

and prolong the operating life of the components.

		Water inlet hose
Insert the water inlet hose into the	water-filling	Water inlet jointer
entrance, then push the water-filling	jointer into
the quick water- filling entrance. (To dismantle		Push
the water inlet pipe, just push the control handle		Control handle
as indicated in the figure and pull it out)

Quick water-filling entrance

6