7
Insert the water inlet hose into the water-filling
entrance on the control panel.
Water inlet hose
Water-filling
entrance

Install the water inlet hose

1. Connect the water hose provided to the water mains

Washing Process
2.Connect the power
3. Fill the machine enough with water
to mix detergent, put in your laundr y
and fill up water to the desired level.
4. Close the lid.
Confirm that the washing machine is
earthed reliably. Then insert the power
plug into the receptacle.
1.Confirm that the drain hose is properly
stowed before filling with water, or the water
will flow through the drain hose.
2.Inside the machine you will see water filling
levels-"1" "2" "3"and"MAX".
This relates to the amount of washing you are
using.Never exceed the "MAX"Mark!
3.Only use the new hose set provided.
NOTE