Using process
Using process
* Total time: including the normal water inlet time, drain time, excluding the power off time. The
total washing time may be influenced by the water inlet pressure and water level.
* Spin time: the time from intermittent running to finishing
* When selecting " Twice wash " program, first soak for about 20 minutes, pre-wash for about 8
minutes, then soak for about 5 minutes, then do washing, rinsing and spinning. The wash time
in the list includes the pre-wash time
5 Close the top lid6 The washing is finished

3.Adjust the "water level selection" knob to select suitable water level

Three water levels available according to the laundries quantity: High; Medium; Low.
Page 9
If you open the top lid, the machine
will stop working before spinning

Start

Pause

After the water inlet as per the preset water level, in case additional water quantity is
required, please first set the button to the "Reset", push and hold it to perform automatic
water inlet. When it reaches the suitable water level, you can turn it to the needed water
level.
After the water inlet under set water level, if higher water level is needed, please first turn
the knob to " Reset ", then turn back to needed water level. The washing machine will
fill water to the new water level.

4 Press the "Start/Pause" button

It beeps to indicate
the finishing of
washing
When the washing is finished, The power will be
switched off automatically about 10 minutes after the
finishing of the washing.