6Finish washing
The washing machine cuts off the power supply 
automatically when wash cycle ends.
Usingi process
After Finishing wash alarm automatically
7 Disposal after washing
After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
When washing, lint filter must be used After using, please clean it in time.
Lint filter:
1.Pull upward to detach
2.Clean the lint
Put it in water and clean while it is still wet. (See to Figure 1).
3.Press downward to assemble.
Figure 1
Clean
Pull down | Put up | Pull down | Put up |
| |||
|
|
| |
|
| Figure 2 |
|
The filter screen of the water inlet valve is likely to be blocked by foreign materials and influence the water inlet. Please clean it with brush every two months.
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol, alcohol etc.
|
|
|
| |
| l |
| ||
Alcoho | Thinner | |||
| Petrol |
| ||
|
|
|
| |
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
2.Do not store water in the washing machine for a long period. Drain the water completely after each using. 3.Be sure to pull off the power plug before maintenance.
4.Hang up the power cord and drain hose.
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (about 1 hour), then close the top lid.
