Before Using
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine.
Install the lint filter
Install the bottom plate
1.Press downward to assmble. 2.Pull upward to detach.
After you open the package,
please lean the washing machine gently down on soft items ( like the towel cloth,
blanket, etc. ). Install the 
bottom plate to the bottom of 
the machine with the eight 
screws by a cross screwdriver, Screw
Back
Front
Soft items
Pull down
Pull down | Put up |
Put up
then lift the machine up gently. See to the figure:
Bottom plate
Adjust the installation position
The largest allowed slope of the shank base of the machine is 2 
. The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods:
Adjust the adjustable foot:
1.To twist the adjustable foot, please first lift up the side of the foot slightly, loosen the adjustable nut, and twist the foot.
2.Fasten the nut after adjustment.
adjustable nut
Loosen 
Fasten
adjustable foot
High Low
