Safety precautions

Please plug the plug on special receptacle with rated voltage. Be sure to use single- phase three pins receptacle. Ensure the earthing prong of the power receptacle is earthed reliably. Use leakage protector if possible.

The power cord plug should be convenient to be pluged in or pluged out with hand while the washing machine runs normally. Be sure to pull the plug out and close the water tap when the machine is idle, when moving the machine, or when cleaning the machine. Do not use wet hand to insert or pull out the power plug.

Do not damage the power cord, bend ,extend, twist, bind or alter it by force. Do not press or nip it with weight. If the power cord or the power plug is bad, or the power plug becomes flexible, to avoid risk it is required to have it replaced by

the technicians of our special shop or the after-sale

service department. Keep the pin of the power plug clean, if the power plug is polluted with dust, please

wipe with dry cloth carefully.

Do not put the machine at damp place like

Do not use water hotter above 50 C .

 

the bathroom. Never wash it with water.

 

Not put wet laundries on the control panel.

 

 

 

 

 

In case the washing machine is installed on ground with carpet, do not block the ventilation hole with carpet.

The ventilation holes at the bottom

Do not wash water-proof laundries like the raincoat, bike covers etc. to avoid abnormal vibrations in spinning.

soft items

Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, do not use the plug any more.

2

Page 4
Image 4
Haier XQB55-10 user manual Safety precautions, Do not use water hotter above 50 C