(If there's breakdown, please pull off the power plug before checking) The
following phenomena are not breakdowns sometimes. Please confirm again
before sending it to repair. If there are real breakdowns, please come to the
special maintenance department or after-sale service department of our
company. Do not repair it by yourself.
Phenomena The reason How to settle
The top lid is not closed
Is the drain hose put down?
Is the drain hose blocked by foreign material?Are the laundriesput slantingly?
Are the laundriesslanting in
spinning?
Is the machine slanting?
Is the machine slanting?
The water tap is not open
The water inlet valve is blocked
The water pressure is too
low and the current is
too small
Is there power failure?
Is the power plug loose?
Is the jointer screw of the water
inlet hose is loose or twisted
awry?
The water faucet leaks
There's abnormal sound inside the
machine
The machine does
not act
Close the top lid
Put down the drain hose. Openand close the top lid once.Clean the foreignmaterial.Openand close the top lid once.Re-order the laundries. Close the
top lid.Level the machine in right
position.
Open and close the top lid once.
Open the water tap. Push
the "Start/Pause" button.
Clean the water inlet valve.
Push the "Start/Pause" button.
Wait for the normal water pressure
Before use.
Use it when the poweris on.
Insert the powerplug tightly.
Level the machine properly.
Re-order the laundries.
Fasten the jointer screw
properly.
Trouble shooting Answer to questionDoesthe water level arrive at the
set water level?
Affusion to the set water level.
Is the power plug loose? Insert the powerplug tightly.
Is the top lid closed? Close the top lid
Are the laundriesput orderly?
Put the laundries orderly.
Not spin
Not wash
Buzzing upon reservation starts,Nixie tube indicates "E0"Safety switch actuates, not
spin, (after self-correction
twice), nixie tube displays
"E3",buzzingNo or slow water filling(notreaching the level in 15 min),nixie tube indicates"E4",buzzingNo or slow drain,nixie tubeindicates"E1", buzzing.If the nozzle is choked with
foreign bodies
Remove the foreign bodies
Poor or no waterfall flowThetop cover leaves open
Close the top lid
Running pauses during spin,nixie tube indicates"E2",buzzing16