Even there's no water in the tub, the
spinning will start after a certain period.
Do not use soak process for woolen laundries.
Wash the laundries that are prone to lose
colors separately from other laundries.
The pulsator will not rotate unless the
water is filled to selected water level.

Selection method of the procedure programs

Attention

Using process
Using process
If you push the "Process selector" button for 6 times, it will resume the original
mode, and it will circulate like that.
If you select the"Speedy wash" program, you have to set the full procedure of wash,
rinse and spin. The procedure can not be selected.
Times of pushing
the"select"button
0
1
2
3
4
5
Applicable procedure Contents(the lighted indicators
indicate the programs about to run)
Spin(spin after drain)
Wash(the washing
liquid remains in the
tub)
When the common laundries
need washing, rinsing and
spinning.
Soak Wash Rinse Spin
Soak Wash Rinse Spin
Soak Wash Rinse Spin
Soak Wash Rinse Spin
Soak Wash Rinse Spin
Soak Wash Rinse Spin
Repeat using the washing
liquid
When the laundries need
rinsing and spinning after
manual washing
When the laundries need only
spinning after manual
washing (first drain then spin)
If the laundries are very dirty,
or the sleeve and collar are
dirty, first soak then wash
Wash,rinse,spin
Rinse,spin
Wash,rinse(the
rinsing liquid remains
in the tub)
Soak,wash,rinse,spin
The laundry needn't spin to avoid wrinkles
Selected procedure
program
After switching on the power, press the button "Water level"to select a water level accordingto the load. Please refer to the paragraphs“Detergent standard dosages and water levels"and"Button of Water level"on page 10.
Water
level
Page 9
Page 10
4 Press the "water level" button to select suitable water level