1 Preparation before washing Using process

Preparation before washing 1.Connect the water inlet hose and open the water tap .

2.Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe.

3.Put down the drain hose.

Pay attention to followings before washing the laundries

Confirm if there's special requirment for the laundries.

Clear the pocket.

Fasten

the

Take

out the

buttons

and

coins ,

sand,

zippers.

 

hairpins etc.

 

 

 

 

 

 

The quantity of the laundries shall not exceed the rated value. The big laundries like the jeans shall be put in

loosely.

When the pulsator is running , the buttons of the l a u n d r i e s m a y

cause

noise.

For

t h e

s a k e

o f

discretion,please put the laundries with buttons into other laundries.

a.Please check if the laundries are applicable for washing. b.Separate those not colorfast from other laundries.

c.For laundries not waterabsorbing,please put them into water with hands.

d.For laundries with much soil,please remove the soil first.You can add detergent on the part with serious soil directly.It is much easier to remove the soil by that mean.

e.For laundries likely to get lint ball or with long fiber,please first turn the inside out before putting them into the water.

f.Do not put the laundries polluted with chemicals directly into the washing machine. g.For those small laundries ,laundries likely to be twisted or worn,and woolen laundries,

please put them into mesh bag before wasing.

Page 9
Image 9
Haier XQB70-10 user manual Preparation before washing Using process