English
Installation Limitations
•Do not install your entertainment center in any location not properly insulated or heated e.g. garage etc. Your entertainment center was not designed to operate in temperature settings below 55˚ Fahrenheit.
•Select a suitable location for the entertainment center on a hard, even surface away from direct sunlight or heat source, e.g. radiators, baseboard heaters, cooking appliances etc. Any floor unevenness should be corrected with the leveling legs located at the bottom.
Door Reversal Instructions
(HBCN05EBB, HBCND05EB, HBCN05FVS, ZHBCN05FVS)
Your entertainment center is built with a reversible door. You have the choice
of either opening it from the left or the right side. In order to reserve the opening direction of your door, please follow these simple instructions. Tilt the entertainment center backwards. Secure the rear from sliding. Tape the door to the cabinet to prevent from falling.
1.Remove the 3 hexagonal screws from base bracket.
2.Remove the pivot holding the bottom of the door.
3.Separate the door from the cabinet and remove the pivot axle from the upper side of the door. Remove and reinstall upper and lower axle door inserts to opposite side.
4.Install the pivot axle to the opposite side.
5.
6.Attach the base bracket to the opposite side
7.Install the bottom pivot aligning with the lower pivot insert on the door. Attach the 3 hexagonal screws to base bracket.
8.Remove tape.
9.As the unit was tilted, wait 24 hours before plugging it in.
5
