If the equipment is connected to the DV IN jack, (this is usually for a digital video camera connection), select “DV” in the front panel display by pressing PROG +/– or INPUT SELECT.

,When an S video cable is connected to the recorder’s LINE 4 IN jack, set “Line4 Input” in Video Setup to “S Video” (page 90).

The playback picture or TV programme from the equipment connected through the recorder is distorted.

,If the playback picture output from a DVD player, VCR, or tuner goes through your recorder before reaching your TV, the copy-protection signal applied to some programmes could affect picture quality. Disconnect the playback equipment in question and connect it directly to your TV.

The picture does not fill the screen.

,Set “TV Type” in Video Setup in accordance with the aspect ratio of your TV (page 89).

The picture does not fill the screen, even though the aspect ratio is set in “TV Type” in Video Setup.

,The aspect ratio of the title is fixed.

The picture is black and white.

,Check that “Line1 Output” of “Scart Setting” in Video Setup is set to the appropriate item that conforms to your system (page 90).

,If you are using a SCART cord, be sure to use one that is fully wired (21 pins).

SoundThere is no sound.

,Re-connect all connections securely.

,The connecting cord is damaged.

,The input source setting on the amplifier or the connection to the amplifier is incorrect.

,The recorder is in reverse play, fast-forward, slow motion, or pause mode.

,If the audio signal does not come through the DIGITAL OUT (OPTICAL or COAXIAL) jacks, check the Audio Setup settings (page 91).

Sound distortion occurs.

,Set “Audio ATT” in Audio Setup to “On” (page 91).

Sound is noisy.

,When playing a CD with DTS sound tracks, noise will come from the LINE 2 OUT AUDIO L/R jacks, LINE 1-TV jack, or LINE 3/ DECODER jack (page 58).

The sound volume is low.

,The sound volume is low on some DVDs. The sound volume may improve if you set “Audio DRC” in Audio Setup to “TV Mode” (page 91).

,Set “Audio ATT” in Audio Setup to “Off” (page 91).

An alternate audio track cannot be recorded.

,When recording from connected equipment, set “Line Audio Input” in TOOLS menu to “Bilingual” (page 52).

,Multilingual tracks (main and sub) cannot be recorded on DVD+RWs, DVD-RWs (Video mode), DVD+Rs, or DVD-Rs. To record the language, select “Main” or “Sub” of “DVD Bilingual Rec.” in Options Setup before recording (page 97). To record both the main and sub sounds, record on a DVD-RW (VR mode).

,Any discs other than the HDD or DVD-RWs (VR mode) cannot be used for recording both main and both sounds. To record on the HDD, set “HDD Bilingual Rec.” in Options Setup to “Main+Sub” (page 97).

,If you have connected an AV amplifier to the DIGITAL OUT (OPTICAL or COAXIAL) jacks and want to change the audio track for a DVD- RW (VR mode) during playback, set “Dolby Digital” in Audio Setup to “D-PCM” (page 92).

PlaybackThe recorder does not play any type of disc (except HDD).

,The disc is upside down. Insert the disc with the labelled side facing up.

,The disc is not correctly inserted.

,Moisture has condensed inside the recorder. Remove the disc and leave the recorder turned on for about half an hour until the moisture evaporates.

,If the disc was recorded on another recorder, the recorder cannot play the disc if it was not finalized (page 37).

100