Hama RDR-HX900 Program Edit, ◆How chapters are created, Dub the selected scenes to a disc, 2 Select “DV EDIT,” and press ENTER, Select and edit the scenes you want to dub

Program Edit

HDD +RW -RWVR-RWVideo+R -R

You can select scenes from a DV format tape, and then automatically record selected scenes to a disc of your choice.

To use this function, you will do the following:

Connect your digital video camera and prepare for recording

m

Select and edit the scenes you want to dub

Using the recorder’s remote control, fast forward or rewind the tape to select the scenes. At this point, the selected scenes are not copied to the disc. The recorder only remembers the IN and OUT points of the scenes that you selected for dubbing. You can also reset, erase, or change the order of the scenes.

m

Dub the selected scenes to a disc

After you have selected the scenes, the recorder will fast forward and rewind the tape automatically and record the scenes to a disc of your choice.

◆How chapters are created

The dubbed contents on the disc become one title, and the title is divided into chapters. For a DVD- RW (VR mode) and the HDD, every shooting on the tape and each selected scene becomes a chapter on the disc (Auto Scene Chaptering function). For other discs, the recorder divides the title in either 6 or 15-minute intervals, according to the setting in “Auto Chapter” in Features Setup.

1 2 3

4 5 6

7 8 9

0

SYSTEM

MENU

</M/m/,,

ENTER

m/M

H

x REC STOP

1 Follow steps 1 to 5 of “Preparing for recording using the DV IN jack” (page 77), and press SYSTEM MENU.

2 Select “DV EDIT,” and press ENTER.

The display asks if you want to start selecting scenes.

Scenes Selection

Do you want to select a scene?

StartCancel

•If you have previously saved a program, the display asks if you want to edit an existing program or to create a new program. To resume editing the existing program, select “Saved Data,” and go to step 6.

80