5
1. Unplug iron. Turn Adjustable Steam
Knob to (Dry
Iron). Place iron
soleplate on flat
surface. Open
water fill cover.
2. Using a cup, slowly pour 6 ounces
of tap water into water tank opening.
Do not fill iron directly from the
faucet.
3. Plug iron into outlet. Set iron upright
on heel rest.
4. Turn the Temperature Control Dial
to the highest
setting.
5. Allow two minutes for the iron to
reach desired temperature.
To Vertical Steam 6. Hang garment in a location that is
not susceptible to damage from heat
or moisture. Do not hang in front of
wallpaper, window, or mirror.
7. Hold iron about 6 inches away from
garment. Press
and release the
Blast Button
to steam out
wrinkles. Do not
press Blast
Button more
than once every
2 seconds.
8. To turn iron off, turn Temperature
Control Dial to Off. Unplug iron.
9. Empty water from the iron following
directions in “Caring for Your Iron.”
NOTE: Do not allow hot soleplate to
touch delicate garments.
Fabric Setting Chart Steam
Setting
Steam Range Dry Iron
Temperature Setting
Off
Nylon, Acrylic
Silk
Wool
Polyester
Rayon
Cotton, Linen
Ironing Instructions
Dry iron using spray if necessary.
Dry iron on the reverse side of fabric.
Use a press cloth and steam iron on the
reverse side of fabric.
Iron while fabric is still damp.
Iron using spray if necessary.
For cotton, iron while still damp or use
spray. For linen, iron on the reverse side
of fabric. Use this setting for vertical
steaming.
840091301 ENv02 10/5/07 8:24 AM Page 5