Power
Light

840091301 ENv02 10/5/07 8:24 AM Page 6

Optional Features (on selected models)

Adjustable Steam Knob

This knob provides minimum steam for wool or maximum steam for linen.

Set the knob to

to change to Dry

Iron.

Auto Shutoff Reset Button/Light

The light comes on when the iron is first plugged in.

After one hour,

the iron will shut off and the light will go out. Push the Reset Button/ Light to turn the iron back on.

Spray and Blast of Steam Buttons

Push Blast Button for an extra blast of

 

 

steam. Push Spray

Blast

Spray

Button to release a

 

 

fine spray of water

 

 

for difficult wrin-

 

 

kles in cotton or

 

 

linen.

Power Light

This light comes on when the iron is plugged in and remains on until the iron is unplugged. The

light stays on even if Temperature Control Dial is turned to Off.

Self-Clean

To keep the steam vents clear of any build-up, follow these instructions after each time you use the iron using steam.

1.Fill iron with water. Plug in iron.

2.Turn Temperature Control Dial to Linen setting and let iron heat for 2 minutes.

3.Turn Temperature Control Dial to Off. Unplug iron and hold over a sink with the soleplate facing down.

4.Turn Adjustable Steam Knob to (Self-Clean). Hot water and steam will flow out of steam vents.

5.Allow all water to drain from iron, then let cool and store.

6

Page 6
Image 6
Hamilton Beach 14570, 14560T, 14515 manual Self-Clean, Optional Features on selected models