840125000 ENv01.qxd 12/14/04 3:04 PM Page 4
Parts and Features
1.Temperature Control
2.Spray and Blast Buttons
3.Water Tank Fill Cover
4.Soleplate
5.
6.Water Tank
7.Auto Shutoff Reset Button*
8.Power On Light/Automatic Shutoff Status Indicator
9.Heel Rest
10.Swivel Cord
*on selected models only
To Dry Iron
1.Plug in iron.
2.Set Temperature Control to desired temperature. Allow 3 minutes for iron to reach desired temperature.
3.To turn iron off, set Temperature Control to OFF ( O ) and unplug the iron.
To Steam Iron
1.Unplug iron. Open water tank fill cover. Using a cup, slowly pour 10 ounces (310 ml) of tap water into the water tank opening. Close water tank fill cover.
2.Plug in iron.
3.With iron in upright position, set Temperature Control to desired setting in steam range. Allow 3 minutes for iron to reach desired temperature. Do not preheat the iron with the soleplate facing down.
4.To turn iron off, set Temperature Control to OFF ( O ) and unplug the iron.
5.Empty water from the iron following directions in “Caring for Your Iron and Soleplate.”
Water
Please use ordinary tap water. If you have extremely hard water, alternate between tap water and distilled water for use in the iron.
4 | 5 |
