840164300 Ev03.qxd 4/11/07 12:21 PM Page 4
Parts and Features
Spray and Blast
Buttons
Steam |
| Swivel | |
ON/OFF Control |
| ||
| Power | ||
|
| ||
|
| Cord | |
Water Fill |
| Heel | |
Cover |
| ||
|
| Rest | |
|
| Auto Shutoff | |
|
| Reset Light* | |
|
| (GREEN) | |
| Temperature | and Power | |
| ON Light | ||
| Control Dial | ||
Soleplate Self Clean | (RED) | ||
|
Spray | Steam |
Steam ON/OFF
Control
Sensor Control
This iron is equipped with a position/motion sensor. This means that if the iron is left motionless it will turn off automatically and cool to room temperature.
To restart iron, simply move the iron and allow it to reheat on heel position.
The iron will reheat to the previously selected setting.
Position Sensing
The iron will turn off automatically when left in the following positions.
The auto off time varies based on the iron’s position.
Iron Position | Motionless Time |
Resting on soleplate | 30 seconds |
Resting on either side | 30 seconds |
Resting on heel | 15 minutes |
Auto Shutoff Reset Light
After 30 seconds of no movement in the horizontal position, the iron will automatically shut off and the green light will blink. Move iron upright to vertical position to turn back on..
4 | 5 |
