840164300 Ev03.qxd 4/11/07 12:21 PM Page 6
To Dry Iron
1.Plug the iron into outlet.
2. Set Steam ON/OFF Control to O (Dry Iron).
3. Turn Temperature Control Dial to desired temperature. Allow 2 minutes for iron to reach desired temperature.
4.To turn iron Off, turn Temperature Control Dial to OFF and unplug iron.
To Steam Iron
1.Unplug iron. Set Steam ON/OFF Control to O (Dry Iron) Hold iron with soleplate parallel to the ground. Open water fill cover.
2.Using a cup, slowly pour tap water into water tank opening until MAX fill line is reached. Close water fill cover. Do not fill iron directly from the faucet.
3.Plug iron into outlet.
4.Turn Temperature Control Dial to desired fabric setting in the steam range.
5.Allow 2 minutes for the iron to reach desired temperature.
6.Set Steam ON/OFF Control to 
.
7. To turn iron off, set Set Steam ON/OFF Control to O (Dry Iron). Turn the Temperature Control Dial to Off. Unplug iron.
8. Empty water from the iron following directions in “Caring for Your Iron.”
Water: Please use ordinary tap water. If you have extremely hard water, alternate between tap water and distilled water for use in the iron.
To Vertical Steam
1.Follow Steps 1 through 5 in
“To Steam Iron.”
2. Hang garment in a location that is not susceptible to damage from heat or moisture. Do not hang in front of wallpaper, window, or mirror.
3.Hold iron about 6 inches (15 cm) away from garment and press and release
the Blast Button to steam out wrinkles. Do not press Blast Button more than once every 5 seconds.
4.To turn iron off, turn Temperature Control Dial to OFF. Unplug iron.
5.Empty water from the iron following directions in “Caring for Your Iron.”
NOTICE: Do not allow hot soleplate to touch delicate garments.
6 | 7 |
