Hamilton Beach 40715 Before First Use

Make sure all three buttons are in the

OFF position (not pushed in) and that the

steam control dial is turned fully clock-

wise to NO STEAM .

Plug in the unit and press ON/OFF button

to turn unit on.

Wash all removable parts in warm, soapy water. No parts may be washed in a dishwasher.

The water pump must be “primed” before first use to work properly.

Operating without water in the reservoir can permanently damage the appliance.

Fill the removable water reservoir to the

MAX fill line with cold water and replace

securely on the back of unit.

When unit is ready, the light next to the

temperature control button will glow

green. Place an empty container under

frothing nozzle so that nozzle is completely

inside container.

Turn the steam control dial counter-

clockwise to STEAM . Press pump

button to pump hot water out of frothing

wand for cleaning purposes.

Press pump button again to turn frothing

nozzle off; then turn steam control dial

clockwise to NO STEAM .

Fill the container about halfway full.

NOTE:The green light next to tempera-

ture selection button will turn off once

pump button is pushed.

Place a container under brew head–it should

be wide enough to catch water from both

spouts. Press pump button and dispense any

remaining water from reservoir.

Before First Use (Priming the Pump)