![Cleaning the Separator:](/images/new-backgrounds/56943/5694319x1.webp)
The drip tray is not
Cleaning the Separator:
1)IMPORTANT: Set both power switches (on the back of the dispenser) to the OFF position and unplug the water dispenser before cleaning.
2)Remove the water bottle and drain the dispenser (see Draining Instruction).
3)Remove the support collar by turning counterclockwise and pulling straight off.
________ Rotate counterclockwise
and pull straight off
4)Remove the plastic separator by pulling straight out (you may need to twist slightly to loosen).
5)Clean the separator with dish soap and water or in the top rack of the dishwasher.
6)Dry the separator thoroughly on both sides.
7)Using a clean cloth or paper towel, thoroughly dry the cold water reservoir.
8)Place the separator back in the dispenser. Make sure the long, tapered end of the separator is positioned firmly on the metal plug on the bottom of the reservoir.
10