PROPER INSTALLATION AND LOCATION
1)Dispenser is for
indoor use only. Do not use outdoors.
2)To prevent algae growth, find a location for your dispenser that is protected from direct sunlight and other sources of heat (e.g., radiators, baseboard heaters, cooking appliances, etc). Do not use when relative humidity is greater than 90%.
3)Do not install the dispenser where the surrounding air temperature will be above 100°F (38°C) or below 50°F (10°C).
4)Place the dispenser on a level surface that can support its weight with a full water bottle on it.
5)To ensure that your water dispenser works at the maximum efficiency, leave at least 8 inches of clearance between all sides of the dispenser and any walls.
6)To prevent damage to dispenser, do not plug dispenser into the power outlet until reading the instructions first!
GROUNDING INSTRUCTIONS
WARNING – Improper use of the grounding plug can result in a risk of electric shock.
•This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock.
•This appliance is equipped with a power cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.
•Consult a qualified electrician if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.
•If the outlet is a standard
•Do not under any circumstances cut or remove the third (ground) prong from the power cord.
•Do not use an adapter plug with this appliance.
•Do not use an extension cord with this appliance. If the power cord is too short, have a qualified electrician install an outlet near the appliance
•For best operation, plug the appliance into its own electrical outlet on a dedicated circuit to prevent flickering of lights, blowing of fuse, or tripping of circuit breaker.
4
