Hamilton Beach 840055200 Parts and Features, Using Your Electric Kettle, Anti-ScaleMesh Filter

Parts and Features

1.	Lid	5.	Power Base*
2.	Power Switch	6.	Anti-Scale Mesh Filter*
3.	Cord Wrap - can exit	* Features on selected
	to left or right of handle	models only.

4.Water Level Window

Cordless	Kettle
Kettle

Anti-Scale Mesh Filter

Scale is caused by lime and calcium in hard water. The mesh filter will prevent these suspended particles

from being poured out of the kettle. To

ensure optimum performance of the filter

it should be periodically cleaned. To clean

the filter, rinse it under running water and brush both side with a soft brush. An old, clean toothbrush works well.

Using Your Electric Kettle

BEFORE FIRST USE: Remove plastic bag from outside kettle and any packaging that may be inside the kettle. Fill the kettle to the MAX indicator on water level window and bring to a boil until kettle shuts off automatically. Discard water and repeat the process. Rinse out the kettle 2 or 3 times. The kettle is now ready for use.

1.Unplug the kettle from the outlet before filling, or for cordless models, remove from power base before filling.

2.Fill the kettle with the required amount of water. Ensure that the water level is between MIN and MAX on the water level indicator. If using the mesh filter, it must be in place.

WARNING: If the kettle is overfilled there is a risk that boiling water may spit out of the spout.

3.Make sure that the lid is in place and the kettle or power base (cordless models only) is standing on a level surface.

If lid is not in place, auto shut-off will not operate.

4.Plug into the outlet and turn on ( l).

5.The kettle will switch off (O) automatically when the water has boiled. (Remember, the surface of the kettle gets hot; take care–only grip the kettle by the handle).

6.After use, unplug the kettle and empty.

NOTE: Use water only. If used for foods other than water, the warranty will be voided.

4 5