Parts and Features
Rack
Heating Element
| Support |
Cord Receptacle | Rod |
| |
Drip Pan |
|
Power Cord |
|
How to Assemble
1.Place base on countertop.
2.Insert drip pan. Make sure the openings in the base and drip pan line up for the power cord.
3.Place support rod in small indentations in drip pan.
4. | Place the cord receptacle end of the | Cord |
| heating element through opening in drip | Receptacle |
| pan. Make sure the notched edge is |
|
| facing down. Position notch over edge |
|
| in drip pan opening, as illustrated. |
|
| When properly assembled the heating |
|
5. | element will rest on the support rod. |
|
Place rack on top of assembled grill. |
| |
6. | Attach power cord to cord receptacle. | Notch |
How to Grill
Power Cord Openings
Base
DO NOT OPERATE THIS GRILL WITHOUT DRIP PAN IN PLACE.
During the first use of the grill some smoke and odor will be noticed. This is normal with heating appliances and will not occur after several uses.
Variable Heat Power Cord
(Available on selected models.) Offers High, Low, and Off settings.
1.Assemble grill as instructed above.
2.Always attach power cord to cord receptacle first. Then place plug into outlet.
3.Preheat grill for 10 minutes. Never leave the grill unattended when using.
4.For best performance, do not cover more than 75% of the rack surface with food.
BEFORE FIRST USE: Wash the rack, support rod, drip pan, and base in hot, soapy water. Rinse and dry thoroughly.
4
Correct Amount to Grill
Overloaded Grill |
5 |