Hamilton Beach 840086200 manual Using Your Mixer, Optional Features, Mixing Shield, Bowl Rest

This feature can be used on most large mixing bowls.

Use the Bowl

Rest while adding ingredients or

checking a

recipe. To use,

TURN MIXER

OFF, then set the mixer on the edge of the bowl.

CAUTION:

• Never use Bowl Rest when mixer is on.

• Do not use Bowl Rest on small (11⁄2 quart) mixing bowls or plastic mixing bowls.

Shift and Stir™ Bowl Lever Use the lever to move the turntable. This allows you to position the beaters near the edge of the bowl or in the center.

NOTE: Do not use Power Burst for more than two minutes at a time or motor may overheat.

Press and hold down the button for additional power

at any speed.

(Available on selected models)

Power Boost

Optional Features

Mixing Shield

1. To attach: Place small tabs on the

mixing shield
into grooves on		Power
		Burst
side of mixer.
Push the
shield back
onto the mixer.
The mixing
shield will snap
	Bowl Rest™
into place in

the groove around the mixer.

2. Now insert the beaters or other attachments and use the mixer as you normally would.

3. To remove: Turn mixer off and unplug. Eject beaters or other attachments.

4.Grasp mixing shield in one hand, while holding mixer in other

hand. Pull shield straight out, then up, to remove.

5.Wash mixing shield in hot, soapy water. Rinse and dry.

Mixer Lockdown Button

Use this feature to lock the mixer in the “down” position when using on the stand.

Using Your Mixer

1.Make sure mixer is unplugged and speed control is set on OFF. Insert beaters. Use as hand mixer or assemble on stand.

2.Plug mixer into electrical outlet.

3.Move the speed control to desired speed, starting at 1 and increasing to a higher speed as necessary.

4.If using as a stand mixer do not leave mixer unattended. Always monitor the progress of the mixing.

5