840131600 ENv01.qxd 2/4/05 10:14 AM Page 6
Sensor Control
RED Light |
|
Solid | Power OFF ( O ) |
Blinking | Iron was heating/reheating and went to |
| OFF ( O ). Iron will reheat when moved. |
GREEN Light |
|
Solid | Iron is heated and ready for ironing. |
Blinking | Iron is preheating/heating. |
To Dry Iron
1.Plug in iron.
2.Turn Adjustable Steam to the Dry Iron position.
3.Set Temperature Selector to desired temperature. With iron in an upright position, allow 3 minutes for iron to reach desired temperature. Do not preheat iron with soleplate facing down.
4.To turn iron off, set Temperature Control to OFF ( O ). The iron may be turned off by pressing the Temperature Setting Button for 3 seconds.
To Steam Iron
1.Unplug iron. Open water tank fill cover. Using a cup, slowly pour 6 ounces (3⁄4 cup) of tap water into the water tank opening. Close water tank fill cover.
2.Plug in iron.
3.Set Temperature Selector to desired setting in steam range. With iron in an upright position, allow 3 minutes for iron to reach desired temperature. Do not preheat iron with
soleplate facing down.
6
4.Set Adjustable Steam to desired steam output.
5.To turn iron off, turn Adjustable Steam to Dry Iron.
Set Temperature Control to OFF ( O ). The iron may be turned off by pressing the Temperature Setting Button for 3 seconds.
6.Empty water from the iron following directions in “Caring for Your Iron and Soleplate.”
Water
Please use ordinary tap water. If you have extremely hard water, alternate between tap water and distilled water for use in the iron.
Features (on selected models)
Adjustable Steam
Provides minimum steam for wool or maximum steam for linen. Set the dial
to 
to change to Dry Iron.
Blast of Steam and Spray Buttons
Push Steam Button for an extra blast of steam. Push Spray Button to release a fine spray of water for difficult wrinkles in cotton or linen.
Steam Spray
7
