Blender Safety
IMPORTANT: This operation manual should be reviewed with all equipment operators as part of your operator training program.
IMPORTANT SAFETY INSTRUCTIONS
WARNING – When using electrical appliances, basic safety precautions should be followed, including the following:
1.Read the Operation Manual before using blender. Keep Operation Manual handy.
2.Plug into a grounded
3.Do not remove ground prong.
4.Do not use an adapter.
5.Do not use an extension cord.
6.Disconnect power before cleaning or servicing.
7.To reduce risk of personal injury, unplug cord from outlet when not in use, and before putting on or taking off parts.
8.To protect against electrical shock, do not immerse cord, plug, or blender base in water or any other liquid.
9.Do not spray the base with a
10.Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
11.Do not use appliance for other than intended use.
12.Not intended for use by or near children.
13.The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
14.To reduce risk of personal injury and to prevent damage to blender or container and cutter assembly, DO NOT insert utensils into blender container while operating blender.
15.Do not store any kitchen utensils in the container because the blender would be damaged if inadvertently turned on.
16.To prevent possibility of serious personal injury, keep hands out of blender container while operating blender. Always operate blender with container lid in place.
17.Avoid contacting moving parts.
18.Blades are sharp. Handle carefully.
19.If cutter assembly blades are loose, discontinue use immediately and replace cutter assembly. Do not attempt to repair or tighten cutter assembly.
20.Inspect container and cutter assembly daily. Do not use broken, chipped or cracked container. Check cutter for wear, nicks, or broken blades. Do not use broken or cracked cutting blades.
21.Do not use outdoors.
22.This appliance is intended for short periods of operation, with a rated operating time of 3 minutes.
23.Do not leave blender unattended while it is operating.
25.To prevent damage to blender, container, or cutter assembly, DO NOT move or shake blender while in operation. If blending action stops during operation, turn blender OFF, remove jar from base, remove jar cover, and use a thin rubber spatula to push mixture toward cutters.
25.When blending hot liquids, remove
26.Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Call the Technical Service number,
or mechanical adjustment.
– SAVE THESE INSTRUCTIONS –
2
