Control Panel
Timer Knob*
| High |
* 3 Min. Max | Speed |
| Low |
| Speed |
| Pulse |
Start
Standby/ON (I)
Stop
Power Requirements
Use a fused electric outlet for the blender. Depending on the model of your blender, the plug will look like the following to meet power requirements:
120 VAC, 60Hz | 230 VAC, 50Hz | 230 VAC, 50Hz |
Ground
prong
Blender Operation – Quick Start Guide
1.Read Important Safety Instructions and Warnings before use.
2.Place the blender on a dry, level surface.
3.Make sure the Power/Reset switch is set to
OFF (O), and the Standby/ON (I) switch is set to STOP . Plug the blender into a grounded 3- prong electrical outlet.
4.Place the container on the base with ingredients and container lid in place.
5.Turn the Power/Reset switch on the rear of the base to the ON (I) position.
6.Select the desired speed: HIGH (2) or LOW (1).
7.Adjust the timer knob to desired run time.
8. Set the Standby/ON (I) switch to START | or | |
use PULSE | . |
|
5