PARTS LIST – BARBED ADAPTERS ARE SOLD SEPARATELY

Parts

QTY

PARTS

QTY

MCRES-525™ Reservoir

1

Retention screws

4

Fill-cap & o-ring

1

Port plug

1

This product is intended for expert users. Please consult with a qualified technician for installation. Improper installation may result in damage to your components. Swiftech assumes no liability whatsoever, expressed or implied, for the use of these products, nor their installation. The following instructions are subject to change without notice. Please visit our web site at www.swiftnets.com for updates.

The MCRES-525™ reservoir is designed to be installed in a 5 ¼” drive bay. It features three 3/8” threaded ports (standard NPT thread) to accommodate a number of configurations (see * Swiftech fittings). The port usage is defined as follows:

(1)Discharge port located at the “stepped-down” compartment. This port must ALWAYS be connected to the pump inlet for the MCRES-525™ to operate properly.

(2)Inlet ports can be used interchangeably: in “single inlet” configuration (the most common), or “dual inlet” configuration when devices are returning to the reservoir in parallel. One port plug is provided to seal one of the inlets in order to accommodate the most common “single inlet” configuration.

Installation of the fittings requires sealant. Recommended sealants include Teflon pipe dope or solvent cement (Goop), which are the easiest to use; Teflon tape will require three to four turns for a good seal. Tighten fittings until firm, do not make up to the nut interfering with the threaded hub - a thread should be visible on the fitting. Use of silicone sealants is not recommended.

The following guide assumes that all liquid cooling components in your system, such as radiator, pump, and water-block(s) have been already installed, and the graphic below shows an overview of a typical installation.

Swiftech Fittings & Spare parts

Important! All fittings (except DP-11) require sealant: plumbers tape, or plumbers goop (preferred)

 

 

PI011623S

DP-11

P6N

A6-8

A6-6

 

 

 

 

1/2" barb to 3/8" NPT, for 1/2"

3/8" barb to 3/8" NPT, for

3/8” NPT to ½” tube (outer

Fill-cap & o-ring

3/8” NPT Port

Inner diameter tubing (3/4" or

3/8" Inner diameter tubing

diameter) quick-connect

 

plug

5/8" outer diameter) – Order

(1/2"outer diameter) – Order

fitting – Order separately

Included

Included

Separately

separately

 

Copyright Swiftech 2004 – All rights reserved – Last revision date: 1-25-05

Rouchon Industries, Inc., dba Swiftech – 1703 E. 28th Street, Signal Hill, CA 90755 – Tel. 562-595-8009 – Fax 562-595-8769 - E Mail: Swiftech@swiftnets.com – URL: http://www.swiftnets.com - Information subject to change without notice

Page 1
Image 1
Hamilton Beach MCRES-525 manual Parts List Barbed Adapters are Sold Separately, Swiftech Fittings & Spare parts, QTY Parts

MCRES-525 specifications

The Hamilton Beach MCRES-525 is an innovative coffee maker that combines modern design with advanced technology to enhance your coffee brewing experience. This versatile machine is designed for coffee aficionados who appreciate rich flavor and convenience.

One of the standout features of the MCRES-525 is its programmable settings. With the ability to schedule brewing up to 24 hours in advance, users can wake up to the delightful aroma of freshly brewed coffee without the hassle of morning preparation. The intuitive digital display and soft-touch control panel make it easy to adjust settings and select brew strength, ensuring a customized cup every time.

This coffee maker utilizes a robust brewing system, which includes a powerful heater and optimized brew basket, to extract maximum flavor from coffee grounds. Whether you prefer a mild roast or a strong cup, the MCRES-525 offers an adjustable brew strength feature, allowing you to tailor the intensity of your coffee to your liking.

Another key characteristic is its capacity. The MCRES-525 can brew up to 12 cups at a time, making it ideal for hosting guests or for daily use in busy households. The large glass carafe is both stylish and functional, allowing for easy pouring and serving.

In terms of convenience, the machine is equipped with a self-cleaning feature, making maintenance a breeze. The removable filter basket is dishwasher safe, ensuring quick and easy cleanup after each brewing session. This coffee maker also features an automatic shut-off function that enhances safety and energy efficiency.

Additionally, the Hamilton Beach MCRES-525 is designed with a sleek, modern aesthetic, making it an attractive addition to any kitchen countertop. It also incorporates a built-in warming plate to keep brewed coffee hot for hours without compromising flavor.

In conclusion, the Hamilton Beach MCRES-525 is a state-of-the-art coffee maker that delivers versatility, convenience, and quality in every cup. With its programmable features, adjustable brew strength, and easy maintenance, it is an excellent choice for both casual drinkers and coffee connoisseurs alike. Combine all these attributes with an elegant design, and the MCRES-525 stands out as a top contender in the home coffee brewing market. Whether you’re starting your day or winding down in the evening, this coffee maker is ready to serve you the perfect brew.