3800ESD Series
Handheld Linear Imager for ESD Sensitive and Clean Room Applications
Features
High Resolution - Reads very high density bar codes 3 mil. and larger.
Clean Room Ready - Cleaned and triple bagged for Class 100 environments.
Bright, Sharp and Focused Aiming Line - Easy to aim and scan codes in any lighting condition from darkness to full sunlight, tightly stacked bar code sheets, or small, high resolution labels.
Solid, Rugged Design - No moving parts inside and solid construction outside deliver years of reliable service in demanding work environments.
Powerful, Flexible Architecture - Connects and interfaces to all major PCs and commercial terminals easily and quickly with
Increased Reading Distances - Easily covers the full range of handheld scanning uses in industrial scanning applications.
Real World Reading Performance - Accommodates printer induced bar space variation, faded labels, short quiet zones, low contrast codes, dot matrix printing, and multipart forms with higher resolution, better optics, and improved decoding algorithms.
The 3800ESD is a high performance scanner designed for the stringent requirements of clean room assembly of sensitive electronic components. The 3800ESD is constructed of conductive materials engineered to eliminate the build up of dangerous static charge on the scanner, and to quickly drain the charge from any other object with which it comes in contact. The 3800ESD is assembled for use in a Class 100 clean room environment and is triple bagged for proper introduction into the end use environment.
Internal components of the 3800ESD scanner are isolated from the conductive path formed by the case, output connector shield, and special shielded cable with drain wire. The scanner is rated for discharges up to 15 kV without damage.
Two models are available: the 3800VHD/ESD which reads very high density bar codes, and the 3800LR/ ESD for more typical applications.
All materials used in the 3800ESD are tested using the methods described in ASTM D257, Standard Test Methods for Conductance of Insulating Materials. The surface resistivity is rated at less than 10E5 ohms/ square. Triboelectric residual charge is measured with a non contact Electrostatic Field Meter and is less than 5 volts on any surface.
To learn how the 3800ESD can work for you, contact us at any of the locations listed on the back or visit us at www.handheld.com.
5 Year Warranty
