Hand Held Products 3800G Selections, Symbologies, Secondary Interface

	Setting	Serial
Selection		Command	Page
	* Indicates default	# Indicates a
		numeric entry
	Off	DFM_EN0	5-5
Data Formatter	*On, but Not Required	DFM_EN1	5-5
	On, Required	DFM_EN2	5-5
	1	VSAF_1	5-5
Alternate Data Formats	2	VSAF_2	5-5
	3	VSAF_3	5-5
Secondary Interface	Selections
Enabling the Secondary	*Disable	2IF_EN0	6-1
Interface	Enable	2IF_EN1	6-1
Secondary RS-232 Con-	RS-232 Interface	2IFTYP0	6-2
nection
	*Manual Trigger	2IFTRG0	6-2
Secondary Trigger Mode	Automatic Trigger	2IFTRG1	6-2
	Presentation Mode	2IFTRG3	6-2
Symbologies
All Symbologies	All Symbologies Off	ALLENA0	7-1
	All Symbologies On	ALLENA1	7-1
Codabar	Default All Codabar	CBRDFT	7-3
	Settings
Codabar	Off	CBRENA0	7-3
	*On	CBRENA1	7-3
Codabar Start/Stop Char.	*Don’t Transmit	CBRSSX0	7-3
	Transmit	CBRSSX1	7-3
	*No Check Char.	CBRCK20	7-4
Codabar Check Char.	Validate, But Don’t Transmit	CBRCK21	7-4
	Validate, and Transmit	CBRCK22	7-4
	*Off	CBRCCT0	7-4
Codabar Concatenation	On	CBRCCT1	7-4
	Require	CBRCCT2	7-4
Codabar Message Length	Minimum (2 - 60) *4	CBRMIN##	7-5
	Maximum (2 - 60) *60	CBRMAX##	7-5
Code 39	Default All Code 39	C39DFT	7-5
	Settings

3800g User’s Guide 11 - 9