Beeper Duration – Good Read

The beeper duration codes modify the length of the beep the imager emits on a good read. Default = Normal.

* Normal Beep

Short Beep

LED – Good Read

The LED indicator can be programmed On or Off in response to a good read. Default = On.

* On

Off

Number of Beeps – Good Read

The number of beeps of a good read can be programmed from 1 - 9. The same number of beeps will be applied to the beeper and LED in response to a good read. For example, if you program this option to have five beeps, there will be five beeps and five LED flashes in response to a good read. The beeps and LED flashes are in sync with one another. To change the number of beeps, scan the bar code below and then scan a digit (1-9) bar code and the Save bar code on the Programming Chart inside the back cover of this manual. Default = One.

Number of Pulses