HandHeld Entertainment 4800i, 4600rp, 4600g High Priority Symbology, Low Priority Symbology

Scan a barcode below to enable or disable Preferred Symbology.

Preferred Symbology On

* Preferred Symbology Off

High Priority Symbology

To specify the high priority symbology, scan the High Priority Symbology bar- code below. On the Symbology Chart on page A-1,find the symbology you want to set as high priority. Locate the Hex value for that symbology and scan the 2 digit hex value from the Programming Chart (inside back cover). Scan Save to save your selection. Default = None

High Priority Symbology

Low Priority Symbology

To specify the low priority symbology, scan the Low Priority Symbology barcode below. On the Symbology Chart on page A-1,find the symbology you want to set as low priority. Locate the Hex value for that symbology and scan the 2 digit hex value from the Programming Chart (inside back cover).

If you want to set additional low priority symbologies, scan FF, then scan the 2 digit hex value from the Programming Chart for the next symbology. You can program up to 5 low priority symbologies. Scan Save to save your selection.

Default = None

Low Priority Symbology

Preferred Symbology Time-out

Once you have enabled Preferred Symbology and entered the high and low pri- ority symbologies, you must set the time-out period. This is the period of time the imager will search for a high priority barcode after a low priority barcode has been encountered. Scan the barcode below, then set the delay (from 100- 3,000 milliseconds) by scanning digits from the inside back cover, then scan- ning Save. Default = 500 ms.

Preferred Symbology Time-out

3 - 16