HANNspree DT06-10A1 user manual Switching Source Signals, Adjusting the Volume

Switching Source Signals

Press the SOURCE button on the remote control or the TV button on the control panel to select the incoming source signal.

The current source setting CH xx appears on the top left corner of the screen; AV1 or AV2 appears on the bottom right corner of the screen.

Current source setting

TV

TV

M

TV

CH

CH

Note

The TV supports S-Video input in

addition to normal video and audio signals. The TV detects the signal type automatically and gives priority to S-video when two signals are detected at the same time. This auto detection function is only available for AV2.

Adjusting the Volume

Press the VOL UP button to increase the volume. Press the VOL DOWN button to decrease the volume. The volume level is dis- played on the TV.

Press MUTE on the remote con- trol to turn the sound off. The word “Mute” appears on the top left corner of the screen and sound is temporarily turned off.

Volume DOWN Volume UP

Mute

M

TV

CH

CH

Press MUTE on the remote con- trol or press the VOL UP button or

the VOL DOWN button to restore the original volume.

27