HANNspree JT02 quick start Quick Start Guide, Front View, Rear View, Making Connections

Quick Start Guide

JT02 37" Liquid Crystal Display TV

This guide is designed as a reference to help you start using your LCD TV quickly. Please refer to the User's Manual for more detailed installation and safety instructions.

Front View

1 2 3 4 5 6

	7		8	9
1.	Volume down button	6.	Enter button
2.	Volume up button	7.	Power button
3.	OSD Menu button	8.	Infrared receiver
4.	Channel down button	9.	Power LED indicator
5.	Channel up button

Rear View

	1	2	3	4	5	6	7 8	9	10	11121314
1.	AC Power Switch						8.	Composite Video input
2.	AC power input						9.	SCART 1 Input
3.	HDMI-1 Input Terminal (19 pin)						10.	SCART2 / SCART2-SV Input
4.	HDMI-2 Input Terminal (19 pin)						11. RF Antenna / Cable TV Input
5.	VGA (15 pin) Signal Input from						12.	Audio Input for VGA
	Computer						13.	Audio Input for AV, S-Video or YPbPr/
6.	YPbPr/ HD Component Video Input							HDMI-DVI components (L/R)
7.	S-Video Input						14.	Audio Output for AV, S-Video or YPbPr

components (L/R)

Making Connections

Connecting to Antenna/Cable TV

1.Connect one end of the UHF/VHF (Antenna) or CATV cable to the TV IN jack (UHF/VHF

IN jack) on the back of the TV.

2. Connect the other end of the UHF/VHF (Antenna) or the CATV cable to the Antenna or CATV socket.

Connecting to VCR, VCD or DVD Player

The illustrations below show you how to connect your TV to a VCR, VCD or a DVD player.

Getting Started

Selecting Input Source

1.Make sure your TV is turned on and a device such as a DVD player is connected.

2.Press the SOURCE button on the remote control and use the  /  button to select the required input source between PC, HDMI1, HDMI2, TV, YPbPr, AV, SVIDEO, SCART1, SCART2, and SCART2-SV.

3.Press enter to confirm your selection.

TV YPbPr AV

HDMI2SVIDEO

HDMI1SCART1

PC SCART2-SV SCART2

With RCA AV cable With S-Video cable

With YPbPr cable With SCART1

Connecting the Power Cord

1. Plug the power connector into the AC-IN input jack on the rear cover of the TV-set.

2. Insert the three-pronged plug at the other end of the power cord into a power outlet.

3. Turn the main power switch on to supply power to the TV.

Auto Channel Scan

Follow the instructions below to automatically preset the channels for your TV before watching it for the first time.

1.Press the "MENU" button on your remote control or the control panel.

2.Use the  /  button to select Channel Menu.

3.Press the  /  button to select country.

4.Press the "ENTER" button to start Auto Scan.

Note: After performing Auto Scan, you need not do it again when turning on your TV next time.

Auto Scan
	C h a n n e l
A u t o S c a n	U K
M a n u a l S t o r e
N a m e

OSD

S e l e c t MENU E x i t

© Copyright 2007 Hannspree, Inc. All rights reserved. JT2002310681P