HANNspree T232 user manual Adjusting the Volume, Using PIP and POP

Notes:

•The TV supports S-Video input in addition to normal video and audio signals. The TV detects the signal type automatically and gives priority to S-Video when two signals are detected at the same time.

•AV5 appears on selected models only.

Adjusting the Volume

1Press volume up to increase the volume.

2Press volume down to decrease the volume.

3Press mute to eliminate sound. The word “MUTE” appears on the bottom right corner of the screen and sound is turned off.

4Press mute again to restore the original volume.

Using PIP and POP

The TV features Picture-in-Picture (PIP) and Picture-outside-Picture (POP), enabling you to view two sources at the same time. Follow these instructions.

1Turn on the TV and select a source signal.

MAIN - 07

2Press PIP/POP from the remote control.

A picture-in-picture window appears on the display, using the last selected source signal for the PIP.

MAIN - 07 PIP - 56

Note:

Refer to “PIP Operation Mode” on page 84 for information on which sources are compatible with each other in PIP and POP mode.

36