12
Troubleshooting
Situation | Solution | |
|
| |
| • Connect the power cord properly. | |
| • Check if the power LED is on or not. | |
| • Press power on the control panel or remote | |
| control. | |
No picture and sound. | • Press source to cycle through connected | |
video sources. | ||
| ||
| • Press channel up or channel down to | |
| switch to other TV stations. | |
| • Make sure all cables are connected | |
| properly. | |
|
| |
| • Check the antenna and cable connections. | |
No picture, or poor picture, sound is OK. | • Adjust the brightness in the OSD menus. | |
| See “Brightness” on page 48. | |
|
| |
| • Adjust the saturation in the OSD menus. | |
Picture is not in color. | See “Saturation” on page 51. | |
• Make sure all cables are connected | ||
| ||
| properly. | |
|
| |
| • Make sure the source device is functioning | |
| properly. | |
| • Make sure the audio cable is connected | |
| securely. | |
Picture is OK, no sound. | • Turn the mute off. | |
• Press volume up on the control panel or | ||
| ||
| remote control. | |
| • Make sure the MPX option is set to | |
| STEREO, I II, or MONO. See “MPX” on | |
| page 67. | |
|
| |
| • Adjust the balance in the OSD menus. See | |
One of the speakers has no sound. | “Balance” on page 60. | |
• Make sure the audio cable is connected | ||
| ||
| securely. | |
|
| |
Cannot receive some TV channels using | • Try the Auto Program function in the OSD | |
“TV Setting” menu. See “Auto Program” on | ||
cable TV. | ||
page 66. | ||
| ||
|
| |
| • Use the Reset function in the OSD menu. | |
Want to reset TV settings. | See “Taking Care of Your TV & Remote | |
| Control” on page 79. |
80
