Axor Carlton Single Control Lavatory Faucet 17010XX1
Technical Specification
Hole size in mounting surface
Minimum
Maximum mounting surface depth | |
Flow rate | 2.2 GPM |
Maximum operating pressure | 145 PSI |
Recommended operating pressure | 22 - 72.5 PSI |
Recommended hot water temp | 120o - 140o F* |
M3 cartridge with BolticTM handle screw |
|
*Some governing bodies require that the water heater be set to 120o F or less. Please know and follow all local codes when setting the temperature on the water heater.
Installation Considerations
•For best results, Hansgrohe recommends installation by a licensed professional plumber.
•Large differences in pressure between the hot and cold supplies should be balanced.
•The supply hoses on this faucet require supply stops with 3/8” compression fittings (not included).
•This faucet has a high temperature limit stop. It ships from the factory on the maximum setting, but may be reset to a lower temperature if desired.