Install the faucet
Place the faucet and sealing ring on top of the mounting surface.
Install the mounting flange over the stud. Thread the collar onto the stud until the mounting flange is firmly against the bottom of the mounting surface.
Secure the supply lines to the stop valves with the 3/8” compression fittings (not included).
Use two wrenches to insure that supply hoses do not twist.
For proper operation of the faucet, hot should be on the left, and cold should be on the right.
Install the drain.
Turn on the water and check for leaks at all connections.
stud
sealing ring
mounting flange
collar