![](/images/new-backgrounds/1042446/4244627x1.webp)
Technical Information |
| showerhead | |
Recommended water pressure | 14.7 - 72.5 psi | ||
| |||
Minimum water pressure | 29 psi |
| |
Max. water pressure | 147 psi |
| |
Recommended hot water temp. | 120� - 140� F* |
| |
Max. hot water temp | 165�F* |
| |
Max. flow rate: |
|
| |
showerhead | 2.5 gpm |
| |
handshower | 2.5 gpm |
| |
neck spray | 2.5 gpm |
| |
bodysprays | 0.72 gpm each | neck spray |
•Thermostatic temperature control
•The high temperature limit stop on the thermostatic mixing valve may be reset to comply with local plumb- ing codes
• Protection against back siphonage provided by check | handshower | |
valves. The check valves should be removed and |
| |
inspected yearly (see page 8). |
| |
• This panel may be used with an instantaneous water |
| |
heater if the heater is at least 24 kW and the output is |
| |
at least 3 gpm @ 30 psi pressure. However, only one |
| |
panel function may be used at a time. | bodysprays | |
*Please know and follow all applicable local plumbing codes when | ||
| ||
setting the temperature on the water heater. In Massachusetts, the water |
| |
heater may be set no higher than 112�F. |
|