Technical Information
Max. water pressure | 147 psi |
Recommended water pressure | 29 - 72 psi |
Test pressure | 232 psi |
Max. flow rate |
|
showerhead | 2.5 gpm |
handshower | 2.5 gpm |
Installation Considerations
This unit does not include a water supply. Use Hansgrohe model 27458XX3 or another supply that complies with ASME A112.18.1/CSA B215.1 including ASME A112.18.3.
The installer should be sure that the mounting location for this product is flat (no projecting joints or tiles) and that the wall is suitable for the installation of this product.
The included mounting hardware is suitable for solid surface walls, such as:
•concrete
•concrete wallboard
•dense natural stone
•brick
•gypsum wallboard/plaster fiberboard surfaced with tile, marble, or stone
If this product is to be installed on another type of wall, such as a fiberglass or acrylic shower enclosure, please contact the manufacturer of the enclosure for recommendations regarding suitable mounting hardware, mounting locations, and reinforcement.
In Massachusetts, the maximum output temperature of the shower mixing valve can be no higher than 112ºF.
Recommended tools (not included)
����
8 mm
2 mm
3 mm
��
6 mm
grease pencil or other marking tool level
ruler
2 & 3 mm Allen wrenches
6 mm drill bit
8 mm wrench Philips screwdriver waterproof sealant
