Turn the water on to the faucet (1).
Peel the protective film from the sensor (2).
Wait 15 seconds, the place a hand in front of the sensor
(3). The water should turn on automatically.
Model 31100 only: Pivot the temperature control lever forward to make the water cooler (4).
Model 31101 only: Set the temperature
Turn the water off at the stops.
Remove the set screw on the back of the faucet.
Pull the faucet housing off (1).
Use a screwdriver to set the water temperature (2). Turn the screw to the rear to make the water warmer, to the front to make it cooler.
Replace the faucet housing. Tighten the set screw.
