Harbor Freight Tools 04041 To Adjust The Depth To Which a Nail Is Driven, Figures B and C

EXHAUST COVER (#4)

NAILS

(10 GAUGE)

(2-3/16”TO 3-1/2” LONG)

NOSE (#29)	FEEDER SHOE
	(#52)

	QUICK COUPLER &
TRIGGER	AIR SUPPLY HOSE
(#44)	(NOT INCLUDED)

BRACKET A

(#35)

	NOSE (#29)
SAFETY (38)	FIGURE B

To Adjust The Depth To Which A Nail Is Driven

1.The depth to which a nail is driven is controlled by the Safety (part #38). (See

Figures B and C).

2.To adjust the depth of drive, loosen the Screw (part #37). Slide Safety (part #38) up or down to the desired position. Then, re-tighten the Screw. Note: Sliding Safety (38) upward increases the depth of drive. Sliding Safety downward de- creases the depth of drive. (See Figure C).

3.Test fire a nail, and check its depth of drive. Repeat Step #2 as necessary to achieve the desired depth of drive. (See Figure C).

REV 01/04

SKU 04041 For Technical Questions, Please Call 1-800-444-3353 Page 8