Specifications
Torque Range | |
|
|
Drive | 1/2" |
|
|
Length | 18" |
|
|
Accuracy | ±4% |
|
|
Important Safety Information
WARNING Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in injury.
Save all warnings and instructions for future reference.
1.The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
2.Wear
3.Use only within rated torque range. Do not use for loosening.
4.Use as intended only. Do not use as hammer or pry bar. Do not use handle extension to increase force. Do not drop.
5.Inspect before every use; do not use if damaged or if parts are loose.
6.Keep away from children.
7.For your safety, service, calibration, and maintenance should be performed regularly by a qualified technician.
8.Use only sockets with the correct drive and rated to at least the torque that will be applied to it.
Operating Instructions
2. Clean and/or repair the threads that will be
|
|
|
|
|
| tightened. Damaged or dirty threads will |
|
|
|
|
| ||
|
|
|
|
|
| result in a misleading torque reading. |
|
| Knurled Handle | ||||
|
|
|
|
|
| 3. Select the desired socket and verify it fits |
Drive Anvil |
|
|
| |||
|
|
|
| properly on the nut or bolt being tightened. | ||
|
|
|
|
|
| |
|
|
|
|
|
| Lock |
|
|
|
|
|
| |
|
|
|
|
| ||
|
|
|
|
|
| Knob |
|
| Torque Settings | ||||
|
|
|
| |||
1.Wear
Page 2 | For technical questions, please call | Item 00239 |
