Harbor Freight Tools 2485 V~ A

Page 8SKU 02485 For technical questions, please call 1-800-444-3353.

SYMBOLOGY

Double Insulated

Canadian Standards Association

Underwriters Laboratories, Inc.

V~ Volts Alternating Current

AAmperes

n0 xxxx/min. No Load Revolutions per Minute (RPM)

Note: Performance of this tool may vary depending on variations in local line voltage. Exten-

sion cord usage may also affect tool performance.

UNPACKING

When unpacking, check to make sure the following parts are included. Refer to the

Assembly Drawing and Parts List located at the end of this manual. If any parts are missing

or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon

as possible.

Contents

Main BELT SANDER - 1 X 30 INCHES Model 02485 ASSEMBLY AND OPERATION INSTRUCTIONS TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE. SPECIFICATIONS Save This Manual GENERAL SAFETY RULES WORK AREA ELECTRICAL SAFETY PERSONAL SAFETY TOOL USE AND CARE SERVICE SPECIFIC SAFETY RULES Page GROUNDING GROUNDED TOOLS: TOOLS WITH THREE PRONG PLUGS DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS EXTENSION CORDS NAMEPLATE AMPERES EXTENSION CORD LENGTH 25 Feet 50 Feet 75 Feet 100 Feet 150 Feet SYMBOLOGY V~ A UNPACKING ASSEMBLY OPERATION Sanding Adjusting Table Angle Leveling the Table Removing and Installing Sanding Belt Adjusting the Sanding Belt Tracking Adjustment of Belt Support Maintenance Page 14SKU 02485 For technical questions, please call 1-800-444-3353. PARTS LIST Part Description Qty PLEASE READ THE FOLLOWING CAREFULLY Record Products Serial Number Here: Page WIRING DIAGRAM LIMIteD 90 DAy/1 yeAr wArrAnty BLACK MOTOR Capacitor